ETA Tool Arms: Torque arms for fastening both vertically and horizontally with the same electric right angle tool

Torque arms for fastening both vertically and horizontally with the same electric right angle tool

If your application requires you to drive vertical fasteners and horizontal fasteners in the same work zone and the same Right Angle tool can do both, then the arms on this page can be an excellent ergonomic improvement as well as protecting your investment in quality assembly tools. We designed this RAHV holder to be versatile and quick to change from vertical to horizontal.  These arms are for Corded or Battery Powered Right Angle Tools only.

EL-Series arms are meant to be used with electric tools or anything other than air tools. However, all EL-Series arms still require a shop air connection for the float cylinder. Our Air Cylinder gives you the smoothest float of any method and decades of life (more than 50,000,000 rundowns).The volume of air needed is very low, less than 0.03 CFM. A 1/4″ (6mm) ID hose, at 80 psi (5.5 bar) minimum, is more than enough capacity.