About Encoder Accuracy There are many factors that affect fastener location accuracy. Some of the common factors are bit or socket extension wiggle, tool spindle compliance and spring loaded spindle collapse, component dimensional consistency, accuracy of the component location in...
About ETA If you’re on the front lines of an industrial assembly process your bottom line depends upon wise capital investment in tools and equipment. It also depends upon productive, injury-free workers producing your company’s product efficiently and without defects....
Models Below Include Tap Arm, 1 HP Air Powered Tap Motor, BILZ Tap Chuck and Air Prep (F/R/L) Shipped Fully Assembled 12-1/4" to 37" (312 TO 940mm) Radial Working Range Quick Change Size 1 Chuck fits Tap Adapters from 0...
For TAxx-A5 Package Chose any 5 Adapters or 4 Tap Adapters and 1 Drill Chuck Adapter from this section Size 1 Torque Limiting Tap Adapters(clutch reduces tap breakage) Size 1 Drill Chuck Adapter TAP SIZE ETA Part No....
Sometimes applications with Down Force Assist (DF Models) require additional control so that the down force can be turned off and on as needed. One example would be using the down force assistance to drive screws and then turning it...
This Palm Button with tubing is an Add-On Safety Option for use with our DF Models (PA806-DF & PA815-DF). It should be mounted in a convenient location so the assembly person can safely depress the Palm Button while driving fasteners...
This guarded foot pedal and tubing is an Add-On Safety Option for use with our Down Force Arms (DF Models). The pedal interrupts the signal from our Flow Valve to our Delay Timer so that the Down Force cannot be...
The IRSH is used to enhance the ergonomics of an assembly station by providing more control than most standard inline tool levers provide. Our comfort Handle grip and low-force Trigger Hat rotate 3600 on bearings so there is no need...
Ordered as a left hand or right hand fold, this option allows the forearm to fold completely flat to the parallel rack and is passively held in that position between assembly cycles with adjustable magnetic park. For use on 315,...