ETA Arms

ETA TA37-HV Pneumatic Folding Tapping Arm Vertical and Horizontal Torque Max: 325 in-lb (37 Nm) Speed: 500 RPM Mild Steel Max Tap Size: 1/2" (M12)...

ETA TA37-A5 Pneumatic Folding Tapping Arm Vertical Torque Max: 325 in-lb (37 Nm) Speed: 500 RPM Mild Steel Max Tap Size: 1/2" (M12) Aluminum Max T...

ETA TA37 Pneumatic Folding Tapping Arm Vertical Torque Max: 325 in-lb (37 Nm) Speed: 500 RPM Mild Steel Max Tap Size: 1/2" (M12) Aluminum Max Tap ...

ETA TA25-HV Pneumatic Folding Tapping Arm Vertical and Horizontal Torque Max: 220 in-lb (25 Nm) Speed: 700 RPM Mild Steel Max Tap Size: 3/8" (M10)...

ETA TA25-A5 Pneumatic Folding Tapping Arm Vertical Torque Max: 220 in-lb (25 Nm) Speed: 700 RPM Mild Steel Max Tap Size: 3/8" (M10) Aluminum Max T...

ETA TA25 Pneumatic Folding Tapping Arm Vertical Torque Max: 220 in-lb (25 Nm) Speed: 700 RPM Mild Steel Max Tap Size: 3/8" (M10) Aluminum Max Tap ...

ETA TA16-HV Pneumatic Folding Tapping Arm Vertical and Horizontal Torque Max: 145 in-lb (16 Nm) Speed: 1200 RPM Mild Steel Max Tap Size: 1/4" (M6)...

ETA TA16-A5 Pneumatic Folding Tapping Arm Vertical Torque Max: 145 in-lb (16 Nm) Speed: 1200 RPM Mild Steel Max Tap Size: 1/4" (M6) Aluminum Max T...

ETA TA16 Pneumatic Folding Tapping Arm Vertical Torque Max: 145 in-lb (16 Nm) Speed: 1200 RPM Mild Steel Max Tap Size: 1/4" (M6) Aluminum Max Tap ...

ETA ZF ELBOW Zero-Fold Elbow Option with Magnetic Park (specify RH or LH fold) Available on new orders only

ETA UV-TH Universal Vertical -Tool Holder

ETA TUV-TH Thin Universal Vertical -Tool Holder

ETA SW-TH Swivel for small in-line drivers - mount on tool inlet-Tool Holder

ETA ST61-TH Vertical Holder for adapting Atlas Copco In-line DC electric tools to ETA arms. Most Atlas reaction bars fit our ST61 adapter with mi...

ETA RS2 Rotation Stop for Shoulder (rear) Pivot Point. Fully adjustable. Attaches to 1-1/4 NPT Base Pipe of any ETA Arm.

ETA RS HANDLE ASM Remote Start Handle only. The "top hat" low-force trigger and 360 degree spin handle provide excelent ergonomics and operator co...

ETA RAV-TH Right Angle Vertical- Tool Holder with indexable handle position

ETA RAHV-TH Right Angle Horizontal & Vertical- Tool Holder with indexable handle position

ETA RAH-TH Right Angle Horizontal- Tool Holder with indexable handle position

ETA QXP-TH This tool holder turns the Ingersoll-Rand QX DC Pistol tool into a Vertical in-line assembly tool. Designed specifically for QXC, QXX a...

ETA QE8-TH Vertical Holder for Ingersoll-Rand QE8 and QA8 In-line tools with 2 bolt mounting flange with holes 3.0" (76.2mm) on center. Tool body ...

ETA QE6-TH Vertical Holder for Ingersoll-Rand QE6, QA6 and some QA4 In-line tools with 2 bolt mounting flange with holes 2.625" (66.7mm) on center...

ETA QE4-TH Vertical Holder for Ingersoll-Rand QE4 In-line tools with 2 bolt mounting flange with holes 2.19" (55.5mm) on center. Bolt holes are f...

ETA PT-TH Pistol Tilt -Tool Holder for horizontal fastening offers adjustable tilt up to +/- 20 degrees off horizontal plane.Can also be used with...