Kolver: K-Ducer Cleanroom Certification
In advanced electronics, medical devices, and microtechnology, airborne particle contamination control is critical to product integrity. Cleanrooms, classified according to ISO 14644-1, provide a controlled environment where every component can be assembled without compromise.
Kolver brings this philosophy to its tools: our K-DUCER screwdrivers, now tested and assessed for cleanroom use per ISO 14644-14, deliver reliability and precision for critical production environments.
K-DUCER Screwdrivers Certified per ISO 14644-14
After rigorous laboratory testing, our KDS and KDS-NT screwdrivers, together with the KDU-1A and KDU-NT control units, met all requirements set by the ISO 14644-14 standard, qualifying for the most relevant ISO 14644-1 cleanroom classes for assembly environments:
- K-DUCER: suitable for use in ISO Class 5 or higher cleanrooms
- K-DUCER-NT (low torque): suitable for use in ISO Class 4 or higher cleanrooms
Test Details
Particle Emission in Cleanroom (atmospheric) (ISO 14644-1, -14)
| Test Parameter(s) | Air Cleanliness Class |
|
Screwdriver KDS:
|
5 |
| Controller KDU-1A | 3 |
| Overall Results | 5 |
Overview of results: Particle Emission in Cleanroom (atmospheric) TP01 in combination with TP02
Please note: Transport damages, incorrect installation, oil leakage, aging behavior, corrosion etc. can influence the test result.
Particle Emission in Cleanroom (atmospheric) (ISO 14644-1, -14)
| Test Parameter(s) | Air Cleanliness Class |
|
Screwdriver KDS-NT:
|
4 |
| Controller KDU-NT | 1 |
| Overall Results | 4 |
Overview of results: Particle Emission in Cleanroom (atmospheric) TP03 in combination with TP04
In environments where even minimal contamination can be critical, K-DUCER screwdrivers deliver reliable performance while maintaining compatibility with cleanroom requirements under typical production operating conditions.
The assessment process involved rigorous testing across all relevant parameters, with measurements carried out under controlled conditions. Every value was analyzed to ensure that the tools' performance is compatible with the standards required in the most sensitive production environments.
The result is a practical solution for those working in critical contexts: a fastening system designed to combine precision, reliability, and compliance with the air purity requirements of cleanroom environments.
Ideal for High-Sensitivity Applications
Our tools are ideal for production environments where contamination control is crucial:
- High-end electronics manufacturing (PCBs, semiconductors)
- Pharmaceutical and medical device production
- Optics, laser systems, and microtechnology
- Any environment where airborne particle control is essential
Why choose Kolver
Choosing Kolver means relying on tools tested under real operating conditions, capable of maintaining consistent performance even in the most demanding environments. Our test results are not just numbers: they represent quality, precision, and reliability verified in the laboratory.
With Kolver, you can elevate your production to a higher standard of cleanliness compliance. And all of this at no additional cost: the KDS cleanroom models are offered at the same price as standard models, with the added advantage of ISO 14644-14 assessment and suitability for controlled environments.
For more articles about Kolver products Click Here
Please Contact us with any questions or for more information.