Gedore: Torque Testing & Measuring Devices
TORQUE ANGLE INDICATOR 8200
When using torque angle indicator no. 8200, please note: The maximum output of the torque wrenches must not be passed. Please ensure that the maximum load capacity of the square drive including the values achieved by angle-regulated tightening is not exceeded:
• 1/2" max. approx. 390 Nm
• 3/4" max. approx. 1330 Nm
› Torque-angle tightening
› Separate angle of rotation gauges with 1/2" or 3/4" square drive
› For additional precise angle tightening (0-360°)
› No. 8200-01/-02 with sliding claw and magnetic arm
› No. 8200-11 only with magnetic arm
› To operate with a suitable torque wrench
› The maximum load of the torque wrench must not be exceeded
E-TP
Electronic torsion test device 0,5 - 3150 Nm / 0,4 - 2323 lbf·ft
› Electronic torque tester integrated with measurement electronics
› Testing, adjusting and certifying right-hand and left-hand torque wrenches
› Vertical and horizontal testing according to DIN EN ISO 6789
› Factory certificate based on VDI 2646
› Optional certificate as per DAkkS-DKD-R 3-8
› A large LC graphic display
› Wide measuring range in Nm, can be switched to cNm, lbf·ft or lbf·in (model dependant)
› Advice from our technical field service
› Includes display, cables and software
› Adapter cable RS232 to USB optionally available (Code 1957880)
8612
Electronic torque tester DREMOTEST E 0,2-3150 Nm / 1,8 lbf·in - 2323 lbf·ft
› Checking/adjustment of right-hand torque wrenches and screwdrivers
› Plug & Work = very easy to use
› High measurement accuracy: +/- 1% tolerance of reading, +/- 1 digit
› Autoreset
› Can be switched from Nm to lbf·ft and lbf·in
› Serial interface RS232 for PC
› Test certificate
› Optional: Car adapter for 12 Volt power supply (No. 8612-390)
› Optional: plausibility verification software (Code 2834391)
RF
Torque measuring / testing device accessories 0,02-25 Nm / 0,075 lbf·ft - 18 lbf·ft
› Capture screw joint simulator for testing screwdrivers
› 3 models ranging from 0.02 Nm to 25 Nm
› Adaptable to the Capture Hub and Capture Sensor systems
› Easy mounting on the test device
› Different screw case hardnesses can be simulated (spring washer packs)
CL
Electronic test device Capture Lite 0,02-350 Nm / 0,015 lbf·ft - 260 lbf·ft
› Digital torque tester for testing torque wrenches and torque screwdrivers
› Light and robust due to aluminium basic housing
› 5 models in the range from 0.02 Nm to 350 Nm
› With 1/4", 3/8", 1/2" square mount (CL1 and CL10H with 1/4" hexagonal shaft)
› Measuring tolerance +/- 1 % for all readings
› 3 measuring modes: floating value display (track), kink point detection (first peak), peak value measurement (peak)
› Easy handling due to 1-button operation (measuring mode, unit)
› Switchable between Nm, lbf-ft and lbf-in
› Optimal readability due to single-line well illuminated OLED display
› Autostart function when a torque tool is inserted
› Auto-sleep mode when not in use
› Easy mounting on the table or on the wall
› Power supply and data output via USB connection
Scope of delivery:
› Capture Lite tester
› USB connection cable
› Adapter (depending on model)
› Operating instructions
› Test certificate
› Stable plastic case with inlay
CL
Capture Hub electronic tester 0,1 - 25 Nm / 0,08 - 18 lbf·ft
› Digital torque tester for testing torque wrenches and torque screwdrivers
› Light and robust thanks to the aluminum basic housing, horizontal and vertical mounting possible
› 4 models in the range of 0.1-25 Nm
› With 1/4 "square socket (CH25 with 3/8")
› Measuring tolerance +/- 1 % for all readings
› 4 measurement modes: sliding value display (track), breakpoint detection (first peak), peak value measurement (peak), screwdriver test
› Including screw joint simulator attachment for testing screwdrivers
› Switchable units N m, cN m, lbf ft, lbf in, ozf in
› 50 test sequences can be programmed
› 2000 measured values can be saved
› Clear and high-contrast TFT display
› Expandable by an additional capture sensor (connection socket available)
› Powerful lithium-ion battery for Line Side mains-independent work
› Data output and mains operation via USB connection
› Optional: PC evaluation software "Capture Manager" (2908778)
Scope of delivery:
› Capture Hub
› Screw joint simulator
› USB cable
› Power supply unit with Euro plug
› Operating instructions
› Test certificate
› Stable plastic case with inlay