Sturtevant-Richmont DTC Series

Interchangeable Head Digital Torque and Angle Wrench

Meets/exceeds ASME B107.300-2010 and ISO 6789 requirements
Bi-directional +/- 2% Indicated Value from 20% to 100% of tool capacity.
All torque and angle settings can be set using buttons on wrench or DTC Connect Freeware.
Built around our traditional pin/spring Dovetail you have access to over 200 interchangeable heads.
SDRT head included with wrench.
Head length is adjustable via keypad. Uses 1 7/16” (36.5 mm) or 3 7/8” (98.4 mm) and maintains common centerline.
Visible from any angle, light bands on both sides of the wrench turn yellow, then green, the wrench beeps, and the handle vibrates when target torque is achieved.
Three AAA batteries included with a wrench. Works with rechargeable NiMH, Lithium Ion, or alkaline batteries.
Target, minimum, and maximum torque entered via wrench keypad or DTC Connect Freeware.
Lockable settings (and presets), via 4-digit password.
Torque units: in.lb., ft.lb., Nm, cNm, cmkg, mkg. • 99 presets, numbered 01-99, optionally named via serial command with up to 16-character names.
Results log large enough for even the busiest assemblies. Download results in csv. format via mini-USB port.
New, smaller profile fits in more places with a light-weight, rugged design.

Five Modes of Operation:

TAM (torque and angle monitoring – double hit protection and identifies changing joint conditions)
T2A (torque to angle – for highly engineered assemblies)
Track Mode (displays torque value as torque is applied. No angle measurement)
Residual (measures existing torque on previously tightened fasteners)
Peak (all torque, no angle measurement)

All models come with our traditional Pin and Spring Dovetail which gives you access to using more than 200 SR one-piece, interchangeable heads. Wrenches calibrated for use with heads having 1 7/16” (36.5mm) common centerline. On request wrenches can be calibrated for 3 7/8” (98.4mm) centerline. The DTC can change the common centerline head length in the software setting and not have to recalibrate the tool.

DTC Connect

When you connect your DTC with DTC Connect Software you can:

Set unit of measure, torque mode, and torque values directly from your Windows PC.
Set, change, name and save parameters
Download the results log from the wrench and upload the CSV formatted file to Excel or another program.
Say goodbye to terminal emulator programs with this Windows PC-based software

Features