We have bit holders with square drives: 3/8”-1 1/2” Bits are from 5-50 mm hexagon and corresponding inch sizes. Bits are locked with a pointed screw. The insert bit is secured by means of a pointed screw against a v-shaped groove in the...
Bolt bushings for mounting studs. We have a wide range of both metric and inch thread studs. For square drives: 1/2”-1” Thread: M6-M48 (also available with thread of inch). For more articles about Momento products Click HereContact us for more...
KM sockets for mounting/dismounting of bearings nuts. They replace hook keys and makes it possible to use the impact wrench or torque wrench. Momento axial nut sockets, specifically from SKF's TMFS series, are specialized tools designed for safely and easily...
Momento’s universal sockets are spring loaded and can be set to the desired angle. (30° for power tools.) For square drive: 1/2”, 3/8" Wrench widths between 13-24 mm. Available in both short and long versions. Check out all available models...
For square drives: 1/4”-2 1/2” Extensions are available in several different lengths. The smaller models have a locking spring pin. The larger models have through holes for the locking pin. Our 1/4 ", 3/8", 1/2 "and 5/8" universal joints can...
We have a wide range of adapters and universal joints for increased flexibility between different socket connections and drive lugs on the machine. With Momento’s compact efforts reduced overall height to a minimum. IPA is provided with a magnet that...
Surface drive power sockets are designed primarily for assembly machines. Particularly suitable in multiple mounting. Available for square drives: 3/8”-1” Key widths between 8-36 mm. Surface drive sockets are intended for stall type nutrunners. Their primary use is to facilitate...
D6K means double 6-edge. These sockets should primarily be used for bolts with 12 point heads. Available for square drives : 1/2”-1 1/2” Wrench width between 10-105 mm. Also available in thin-wall design. Thin wall sockets have small outside diameters like...
Available in different variants such as double hexagon (D6K), surface and others. Available for square drives: 3/8”-2 1/2” Wrench widths between 4-170 mm. The long socket makes it possible to reach the nut even if the screw protrudes above the...
