Leadership JEMMS Cascade specializes in the development and production of specialty manufacturing tooling. We focus on manufacturing needs to engineer solutions which drive continuous improvement for all our customers. We understand the rigorous demands of global manufacturing and prove to our...
Description Fixtured Attachments are mounted to multi-spindle systems and torque reaction arms. When used in multi-spindle systems these attachments are typically equipped with retractable spindles. Sometimes referred to as sliding spindles, Retractable Spindles provide a retractable, spring loaded output spindle....
Description Whipless Extensions extend a power tool’s reach with a supported extension shaft. Support housings and ground shafts keep vibrations and extension shaft wobble to a minimum. Safety Sleeves are designed to shield the operator, and work gloves, from the...
Description Angle Heads reorient power tool torque transmission and its associated reaction forces. They tilt the power tool motor off the fastener axis, drastically increasing height accessibility, and allow operators to hand hold power tools during fastening. Common Applications Torque...
Description Multi-Spindle Attachments are designed to simultaneously start, or remove multiple fasteners. Driven by a single motor, all fasteners turn at the same RPM and stop once the first fastener is snug. This attachment reduces assembly cycle time through elimination...
Description Aerospace Attachments are light weight fastening and drilling offsets used to access different areas within the fuselage structure. Applications include installation of common shear or clinch type aero-fasteners. These attachments are often paired with spring loaded indexing collars to...
Description Weatherstrip Attachments are designed to install crimp type weatherstripping around automotive doors and deck lids. Common Applications Offroad cab seals Automotive door seals Decklid seals Contact us for more information
Description Hold & Drive Heads hold a threaded shaft or bolt from rotating while driving or tightening a nut. An inner spring loaded hold shaft retracts during nut rundown. Ball joints, shock absorbers, and sway bar applications typically require Hold...
Description Variant of the Closed End Attachment. Close End Inline/ Angular Attachments include bevel and pinion gears that allow higher torque multiplication in a smaller overall attachment size. These attachments are sometimes referred to as inline crowfoot or doors-on heads....
