Gedore: Torcofix K

TORCOFIX K

Robust torque wrench with square drive and integrated ratchet-head function for controlled bi-directional tightening.

CHROME-PLATED RATCHET HEAD- All 1/4" - 1/2" square drives of the TOROFIX K-series with mushroom head. This mushroom head prevents an unintentional pulling out of the whole square drive when changing the nut socket.

AUTOMATIC ACTUATION-The TORCOFIX actuates with a clear tactile impulse and audible signal and is immediately ready for operation again.

DIN EN ISO- Classified to DIN EN ISO 6789-2:2017 Type II Class A, with a factory certificate allowing for operations to be traced back. Adjusted to a permitted +/- 3 % deviation and better. The specifications of the standard (+/- 4 %) are exceeded.

ROBUST STEEL TUBE- With high corrosion protection, chrome-plated, silk-metal

SERIAL NUMBER- Serial number on the wrench and on the certificate for unambiguous product identification, traceable via in-house DAkkS laboratory to national standards

HANDGRIP WITH A USER AID- Plastic handgrip, new ergonomically enhanced shape, with an indentation in the middle of the handgrip. User aid and reference points for calibration.

LIGTHWEIGHT AND RELIABLE- Locking button enables reliable locking of the torque setting

MICROMETRE SCALE- Optimized shape, stable scale frame with red shaded micrometer scale ring. Model-dependent intervals of 0.025, 0.1, 0.25, 0.5 or 1 Nm allow very accurate settings. Improved shape, stable scale frame with red underlaid micrometer scale ring. Model-dependent graduations of 0.025, 0.1, 0.25, 0.5 or 1 Nm allow a very precise setting.

TF-K

Torque wrench Torcofix TF-K 20-850 Nm / 15-630 lbf·ft

Use:

› Controlled screw tightening in the most common range of 20 - 850 Nm / 15 - 630 lbf·ft

› Adjustable, releasing and sturdy tubular torque wrench with integrated ratchet and with square drive for industry and the trades

Features:

› Classified as per DIN EN ISO 6789-2:2017 Type II Class A; adjusted to a maximum permissible +/-3% deviation and thus with a greater precision than the standard-stipulated +/-4%

› Incl. traceable test certificate (DIN EN ISO 6789-2:2017)

› For controlled bi-directional tightening

› 1/2" mushroom head square with ball lock. From 3/4" with square socket and pin retention

› Robust, matt powder-coated tubular steel construction, with galvanized ratchet and high-quality plastic parts

› New ergonomic handle, shaped according to the natural grip position of the hand

› Clearly recognizable and tactile hand centering aid and calibration aid in the middle of the handle

› Double scale Nm / lbf·ft and vernier are protected from abrasion and contamination by an enlarged viewing window

› With vernier scale for Nm main scale for setting intermediate scale values; lbf-ft setting only via main scale

› Vertical alignment of the scale, torque adjustment therefore suitable for left and right handers

› Scale line positioned directly above the scale prevents reading errors (parallax errors)

› Unit labeling integrated in the scale frame and also protected by viewing windows,

› Precise jump-off mechanism generates a clearly perceptible and audible trigger signal when the set torque value is reached

› Incl. roll away protection, prevents rolling away when the tool is put down

TF-SE

Torque wrench TORCOFIX TF-SE 20-400 Nm / 15-300 lbf·ft

Use:

› Adjustable, releasing and sturdy tubular torque wrench with rectangular cavity for industry and the trades

Features:

› Classified as per DIN EN ISO 6789-2:2017 Type II Class A; adjusted to a maximum permissible +/-3% deviation and thus with a greater precision than the standard-stipulated +/-4%

› Incl. traceable test certificate (DIN EN ISO 6789-2:2017)

› Robust, matt powder-coated tubular steel construction, with galvanized ratchet and high-quality plastic parts

› New ergonomic handle, shaped according to the natural grip position of the hand

› Clearly recognisable and tactile hand centring aid and calibration aid in the middle of the handle

› Double scale Nm / lbf·ft and vernier are protected from abrasion and contamination by an enlarged viewing window

› With vernier scale for Nm main scale for setting intermediate scale values; lbf-ft setting only via main scale

› Vertical alignment of the scale, torque adjustment therefore suitable for left and right handers

› Scale line positioned directly above the scale prevents reading errors (parallax errors)

› Unit labeling integrated in the scale frame and also protected by viewing windows,

› Precise jump-off mechanism generates a clearly perceptible and audible trigger signal when the set torque value is reached

› Incl. roll away protection, prevents rolling away when the tool is put down

TF-Z

Torque wrench TORCOFIX TF-Z 20-850 Nm / 15-630 lbf·ft

Use:

› Controlled screw tightening in the most common range of 20 - 850 Nm / 15 - 630 lbf·ft

› Adjustable, releasing and sturdy tubular torque wrench with spigot end for industry and the trades

Features:

› Classified as per DIN EN ISO 6789-2:2017 Type II Class A; adjusted to a maximum permissible +/-3% deviation and thus with a greater precision than the standard-stipulated +/-4%

› Incl. traceable test certificate (DIN EN ISO 6789-2:2017)

› For controlled right- and left-hand tightening (change tool for changing direction)

› Trunnion mounting in the versions Ø 16 mm and Ø 22 mm

› Factory depth gauge: 32 mm (Ø 16 mm) or 56 mm (Ø 22 mm)