Gedore: TBN Breaker
Pre-set torque wrench with automatic snap actuation. Torque wrench offering maximum accuracy. Guaranteed tightening values without over-tightening.
WORKING PRINCIPLE- When the TBN breaking torque wrench is operated, the rear section of the driver unit presses the roller. When the pre-set torque value is achieved, the lever switches over and the front section of the drive unit breaks.
TECHNICAL INFORMATION- TBN BREAKER TBN2 G / TBN10 G values are changed using the "Double Positive" adjustment system.
DRIVE- 16 mm spigot end or 9x12 mm rectangular cavity made of quality steel with pin-locking mechanism
BREAKING- All TBN breaking torque wrenches break by 20° at the pivot point when the set torque is achieved. The models TBN2 G/ 10 G can also be set to a breaking angle of 90°.
RUBBER HANDGRIP- Ergonomic and pleasant to hold in your hand. Prevents slipping.
LIGHTWEIGHT STEEL TUBE- Firm, solid, and free of corrosion
PATENTED MECHANISM- Guarantees a long product lifespan with guaranteed accuracy values
As an option, we also manufacture the TBN BREAKER models TBN2 G/ TBN10 G with interchangeable attachments directly positioned on the tool.
TBN
TBN Breaking Torque wrench KNICKER 0,4-135 Nm / fixed setting
› Fixed torque wrench for series assembly
› 9x12 mm inner rectangular or 16 mm spigot
› For bi-directional tightening (the wrench only has to be turned by 180°!)
› Breaking of the handgrip by 20° when the pre-set torque value is achieved makes over-tightening unlikely
› Certificate according to DIN EN ISO 6789
› Fixed setting at GEDORE or by hand on a test device
› If ordering, please specify the Nm value - if a fixed factory pre-setting is desired (price on request)
› No. TBN2G / TBN10G: EPA (Electrostatic Protected Area) compliant
8801
Torque wrench TYP 88 KNICKER 150-1000 Nm / 100-750 lbf·ft / pre-set
Use:
› Controlled screw tightening in the most common range of 150 - 1000 Nm › Industry and vehicle sector (lorries, industrial vehicles)
Features:
› Adjustable torque wrench - with scale
› 3/4" square drive with integrated ratchet function
› Suitable for bi-directional tightening on account of push-through square drive
› Working accuracy: +/- 4 % tolerance of set torque
› Acc. to DIN EN ISO 6789, traceable to national standards
› Breaking mechanism as an actuation signal which can be seen and felt and makes over-tightening unlikely
› Dual scale Nm and Ibf·ft
Scope of delivery:
› Torque wrench Typ 88 KNICKER
› Test certificate acc. to DIN EN ISO 6789
› Delivery in sturdy plastic case