Gedore Dremometer
Operate Without Inaccuracies
Regardless of where you apply the force, at the center of the handgrip or another part of the DREMOMETER, with both hands or using an extension tube, your torque setting will always be attained, without shifts in value. Due to its unique single-axis location of the center of rotation and the output square drive, the DREMOMETER is a tool that can be operated free from errors. In contrast to conventional torque wrenches, this single lever enables tightening without shifts in the measured value and without interference caused by activation outside of the handgrip. However, value shifts are possible when activating the DREMOMETER with special wrenches or when using wrenches with different depth gauges.
1 Position of the lever chain without impact of force (in starting position).
2 Position of the lever chain with impact of force before the set torque is achieved. The force is transferred from the primary lever to the intermediary and final lever until the final lever slips past the so-called release lever through the sliding back of the angle-lever body.
3 Position of the lever chain when the force impacts after the torque setting is achieved. Immediate position after the clear tactile impulse and audible signal "click". On relief, the lever chain moves back into the starting position (1).
8560 A - 8565 AL
Torque wrench DREMOMETER 8-40 Nm / 70-350 lbf·in
› Torque wrench with 3/8" square drive in the range of 8 - 40 Nm
› Single- and double-square drive for controlled bi-directional tightening
› You can feel and hear an audible automatic click
› Double scale for measuring ranges in the lbf-in range
› Highest accuracy max. deviation of +/- 3 %
› Error-free operation - no change in torque values when operated outside the handle
› Certificate according to DIN EN ISO 6789:2017 part 2
8561 B- 8566 BL
Torque wrench DREMOMETER 25-120 Nm / 18-90 lbf·ft
› Torque wrench with 1/2" square drive in the range of 25 - 120 Nm
› Single- and double-square drive for controlled bi-directional tightening
› You can feel and hear an audible automatic click
› Double scale for measuring ranges in lbf-ft range
› Highest accuracy max. deviation of +/- 3 %
› Error-free operation - no change in torque values when operated outside the handle
› Certificate according to DIN EN ISO 6789:2017 part 2
› Power-saving through the use of optional extension tubes
8573 BC - 8578 BCL
Torque wrench DREMOMETER 40-200 Nm / 30-150 lbf·ft
› Torque wrenches with 1/2" square drive in the range of 40 - 200 Nm
› Single- and double-square drive for controlled bi-directional tightening
› You can feel and hear an audible automatic click
› Double scale for measuring ranges in lbf-ft range
› Highest accuracy max. deviation of +/- 3 %
› Error-free operation - no change in torque values when operated outside the handle
› Certificate according to DIN EN ISO 6789:2017 part 2
› With push-button release
8562 C - 8567 CL
Torque wrench DREMOMETER 60-300 Nm / 45-220 lbf·ft
› Torque wrenches with 1/2" square drive in the range of 60 - 300 Nm
› Single- and double-square drive for controlled bi-directional tightening
› You can feel and hear an audible automatic click
› Double scale for measuring ranges in lbf-ft range
› Highest accuracy max. deviation of +/- 3 %
› Error-free operation - no change in torque values when operated outside the handle
› Certificate according to DIN EN ISO 6789:2017 part 2
› Power-saving through the use of optional extension tubes
8570 CD - 8575 CDL
Torque wrench DREMOMETER 80-360 Nm / 60-260 lbf·ft
› Torque wrench with 3/4" square drive in the range of 80 - 360 Nm
› Single- and double-square drive for controlled bi-directional tightening
› You can feel and hear an audible automatic click
› Double scale for measuring ranges in lbf-ft range
› Highest accuracy max. deviation of +/- 3 %
› Error-free operation - no change in torque values when operated outside the handle
› Certificate according to DIN EN ISO 6789:2017 part 2
› Power-saving through the use of optional extension tubes
8574 DS - 8549 DSL
Torque wrench DREMOMETER 110-550 Nm / 80-400 lbf·ft
› Torque wrench with 3/4" square drive in the range of 110 - 550 Nm
› Single- and double-square drive for controlled bi-directional tightening
› You can feel and hear an audible automatic click
› Double scale for measuring ranges in lbf-ft range
› Highest accuracy max. deviation of +/- 3 %
› Error-free operation - no change in torque values when operated outside the handle
› Certificate according to DIN EN ISO 6789:2017 part 2
8563 D - 8568 DL
Torque wrench DREMOMETER 155-760 Nm / 115-560 lbf·ft
› Torque wrench with 3/4" square drive in the range of 155 - 760 Nm
› Single- and double-square drive for controlled bi-directional tightening
› You can feel and hear an audible automatic click
› Double scale for measuring ranges in lbf-ft range
› Highest accuracy max. deviation of +/- 3 %
› Error-free operation - no change in torque values when operated outside the handle
› Certificate according to DIN EN ISO 6789:2017 part 2
8563 DR - 8568 DRL
Torque wrench DREMOMETER 155-760 Nm / 115-560 lbf·ft
› Torque wrench with 3/4" square drive in the range of 155 - 760 Nm
› Single- and double-square drive for controlled bi-directional tightening
› You can feel and hear an audible automatic click
› Double scale for measuring ranges in lbf-ft range
› Highest accuracy max. deviation of +/- 3 %
› Error-free operation - no change in torque values when operated outside the handle
› Certificate according to DIN EN ISO 6789:2017 part 2
› Power-saving through the use of optional extension tubes
8571 DX - 8576 DXL
Torque wrench DREMOMETER 520-1000 Nm / 380-730 lbf·ft
› Torque wrench with 3/4" square drive in the range of 520 - 1000 Nm
› Single- and double-square drive for controlled bi-directional tightening
› You can feel and hear an audible automatic click
› Double scale for measuring ranges in lbf-ft range
› Highest accuracy max. deviation of +/- 3 %
› Error-free operation - no change in torque values when operated outside the handle
› Certificate according to DIN EN ISO 6789:2017 part 2
› Save effort using the optional extension tubes
8581 EK - 8586 EKL
Torque wrench DREMOMETER 600-1500 Nm
› Torque wrench with 1" square drive in the range of 600 - 1500 Nm
› Single- and double-square drive for controlled bi-directional tightening
› You can feel and hear an audible automatic click
› Single scale with a scale graduation of 25 Nm
› Highest accuracy max. deviation of +/- 3 %
› Error-free operation - no change in torque values when operated outside the handle
› Certificate according to DIN EN ISO 6789:2017 part 2
› Save effort using the optional extension tubes
8564 E- 8569 EL
Torque wrench DREMOMETER 750-2000 Nm
› Torque wrenches with 1" square drive in the range of 750 - 2000 Nm
› Single- and double-square drive for controlled bi-directional tightening
› You can feel and hear an audible automatic click
› Double scale for measuring ranges in lbf-ft range
› Highest accuracy max. deviation of +/- 3 %
› Error-free operation - no change in torque values when operated outside the handle
› Certificate according to DIN EN ISO 6789:2017 part 2
› Save effort using the optional extension tubes
8572 F
Torque wrench DREMOMETER 1500-3000 Nm
› Torque wrench with 1.1/2" square drive in the range of 1500 - 3000 Nm
› Single square for the controlled legal suit
› You can feel and hear an audible automatic click
› Double scale for measuring ranges in lbf-ft range
› Highest accuracy max. deviation of +/- 3 %
› Error-free operation - no change in torque values when operated outside the handle
› Certificate according to DIN EN ISO 6789:2017 part 2
› Save effort using the optional extension tubes
7554 AM A+S - 7572 F A+S
Torque wrench DREMOMETER A+S with pre-set value locking and safety device (A+S)
Fixed DREMOMETERS for series production
› Single- and double-square drive for controlled bi-directional tightening
› You can feel and hear an audible automatic click
› Double Scale
› Highest accuracy max. deviation of +/- 3 %
› Error-free operation - no change in torque values when operated outside the handle
› Certificate according to DIN EN ISO 6789:2017 part 2
› Save effort using the optional extension tubes
› If fixed factory setting is required, please specify Nm value when ordering (price on request)