Gedore: Dremaster
DREMASTER DMK
Robust torque wrench with square drive and integrated ratchet-head function for controlled bi-directional tightening and interchangeable mushroom head with push-button release.
ZINC-PLATED RATCHET HEAD- All 1/2" square drives of the DREMASTER® DMK-series have a black plastic cap - also referred to as a mushroom head. This mushroom head prevents an unintentional pulling out of the whole square drive when changing the nut socket.
AUTOMATIC ACTUATION- The DREMASTER® DMK actuates with a clear tactile impulse and audible signal and is immediately ready for operation again.
DIN EN ISO- Classified to DIN EN ISO 6789:2003 Type II Class A, with a factory certificate allowing for operations to be traced back. Calibrated to a permitted +/- 3 % deviation and better. The specifications of the standard (+/- 4 %) are exceeded
ROBUST STEEL TUBE- With high corrosion protection, chrome-plated, satin powdercoated
ADDITIONAL PROTECTION OF THE SERIAL NUMBER Concealed setting drill hole = secured adjusting/setting system Serial number on the wrench and on the certificate for unambiguous product identification, traceable via in-house DAkkS laboratory to national standards
HANDGRIP WITH A USER AID- Grey plastic handgrip, new ergonomically enhanced shape, with an indentation in the middle of the handgrip. User aid and reference points for calibration
DUAL SCALE WITH MAIN AND ALTERNATIVE UNIT (NM/IBF·FT)- Main unit Nm with vernier. At all times only one unit in the viewing area = avoids any reading errors. Change-over switch next to the scale for straightforward unit selection.
LIGTHWEIGHT AND RELIABLE- Locking button enables reliable locking of the torque setting. "Torque adjustable" reference by means of opened lock symbol. Provision for rapid setting from the separate hexagon allen key fixture.
NONIUS- Model-dependent intervals of 1 or 0.5 Nm allow very accurate settings.
DMK
Torque wrench DREMASTER® K 20-850 Nm
› 1/2" mushroom head with push-button release, integrated ratchet function, from DMK 400 with 3/4" square socket
› For controlled bi-directional tightening
› You can feel and hear an audible automatic click
› Highest accuracy max. deviation of +/- 3 %
› Ergonomically shaped plastic handgrip with calibration aid
› Switching between main scale Nm and sub scale lbf-ft, no reading errors
› Provision for rapid setting with hexagon allen key, not included
› Secured adjusting/setting system
› Certificate according to DIN EN ISO 6789:2017 part 2
DMZ
Torque wrench DREMASTER® Z 20-850 Nm / 15-630 lbf·ft
› Spigot holder for push-on tools (jaw, ring, reversible ratchet)
› For controlled bi-directional tightening
› You can feel and hear an audible automatic click
› Highest accuracy max. deviation of +/- 3 %
› Ergonomically shaped plastic handgrip with calibration aid
› Switching between main scale Nm and sub scale lbf-ft, no reading errors
› Provision for rapid setting with hexagon allen key, not included
› Secured adjusting/setting system
› Certificate according to DIN EN ISO 6789:2017 part 2
› For special tools observe the gauge block
DMSE
Torque wrench DREMASTER® SE 20-400 Nm / 15-300 lbf·ft
› SE holder for insert tools (jaw, ring, reversible ratchet)
› For controlled bi-directional tightening
› You can feel and hear an audible automatic click
› Highest accuracy max. deviation of +/- 3 %
› Ergonomically shaped plastic handgrip with calibration aid
› Switching between main scale Nm and sub scale lbf-ft, no reading errors
› Provision for rapid setting with hexagon allen key, not included
› Secured adjusting/setting system
› Certificate according to DIN EN ISO 6789:2017 part 2
› For special tools observe the gauge block